D-STEP ELECTRONIC FLOOR TILE

The D-Fence’s D-Step Electronic Floor Tile is a unique and innovative electronic security system that can be installed under any type and size of floor tile to provide extremely reliable security 24 hours a day, with Zero False Alarms, to passageways, stairways, entrances to rooms/offices and sensitive areas, access to safes and safe box rooms, under decks, around swimming pools, etc. Built from floor tiles (that can be metal, stone, porcelain, wood, vinyl, etc.) equipped with D-Fence’s unique Strain Gauge Sensors, the system can be installed on any surface and any specific place that needs to be protected, yet it’s completely invisible, since it looks just like any other of the floor tiles at the site.

The D-Step Electronic Floor Tile provides an immediate and accurate alarm/warning when stepped on it (while the system is armed) activating D-Fence’s unique Strain Gauge Sensors that are typically set to alert when forces greater than 15 kgs. are applied to them. This ensures that the system will not be activated by small animals, ground tremors, people walking near the tile (but not stepping on it), etc. ensuring an almost Zero False Alarm Rate.

Key Benefits
  • Can be installed anywhere, both indoors and outdoors, on top of any surface and under any type of  floor or tile.
  • Completely invisible, it doesn’t change the nature of the area where it’s installed.
  • Close to Zero False/Nuisance alarm Rate.
  • Based on D-Fence’s rugged and robust Stainless-Steel sensors, with Life-time warranty.
  • Contrary to Infra-Red, Volumetric, microphonic, and other sensors, the system ignores anything under the specified weight.
  • No need for on-going maintenance. “Shoot-and-Forget Systems
D-STEP ELECTRONIC FLOOR TILE
D-STEP ELECTRONIC FLOOR TILE Specifications
Physical Description
System Length Unlimited
Cover Weight Up to 350 Kg
Cover Height According to Customer Specification
Cover Design According to Customer Specification
length of System Zone 12m – 24m
System Unit Processor
Minimum Trigger Force Usually 15 Kgs (above the static weight of the cover) and above will activate the alarm
Dry Contact No. & N.C. 1A@48VDC
Power Supply 12mA@48VDC
Communication Output RS232 serial communication interface
Environmental Conditions
Temperature Range of Operation +72°C to -25°C (162°F to -13°F)
Storage Tem perature +80°C to -55C (176°F to -67°F)
Corrosion All system parts receive anti-corrosion treatment according with MIL T 152, all parts are 8.8.
Humidity 95%
Lighting and Electronic Transients MIL STD 9094
EMI & RFI According to MIL STD 461, 462
Reliability and Maintenance
False Alarm Rate (FAR) Less than one per Km. per three months maximum
MTBF Sensor 4.7×10 Hours
MTTR 30 Minutes
Warranty 10 years for the sensors