Embedded Design Services

Hardware Engineering


ELDAAS offers a wide range of Embedded Design Services that can transform an idea into a complete product. This includes devising of System Architecture, Board and Firmware Design, Application Software Development, Mechanical Design, Prototyping, Validation, Regulatory Certification and Pilot Production.

From initial architecture to manufacturing our Hardware Design Services provides Single board and multi-board system design, Mixed Signal board (Analog and Digital), Processor/Micro-controller based designs, FPGA based designs, Reference designs/ Evaluation platforms, Power optimized designs, Small form factor designs, High density boards. Following are the sub offerings


Expertise


Microcontroller

  • MSP430, Tiva Series, Wireless MCUs (CC3xxx) from Texas Instruments
  • STM8/STM16/STM32 Low power and High performance MCUs from STMicroelectronics
  • PIC Series Controllers from Microchip
  • Kinetics and LPC167x MCUs from NXP Semiconductors
  • 8051 based, SAM4, SAM5 MCUs from Atmel
  • Other ARM Cortex –M Based MCUs

Board Design

  • High Speed Digital and Mixed Signal Board Designs
  • Embedded Processor and DSP based Designs
  • Module design
  • Component Engineering
  • Battery Operated, Portable designs
  • Wireless (Wi-Fi, BT, NFC, ZigBee, Cellular, GPS) Application designs
  • Protocol validation & measurements, Debugging & tuning, diagnostic
  • Product Testing and Verification
  • Proto Manufacturing & Support

Processor

  • MX6 Series processor from NXPSemiconductors
  • AM437x, AM537x, Davinci Multimedia Processors from Texas Instruments
  • SAMA5D Processors from Atmel
  • Digital Signal Processors
    • Single and Multicore Blackfin Processor from ADI.
    • TMS320 DSPs from Texas Instruments
  • X86 and ARM Processor Modules

High Speed Interface

  • Giga Bit Ethernet
  • PCI Express Gen 2.0/ 3.0 / 4.0
  • SATA 1.0/ 2.0/ 3.0
  • USB 2.0/3.0
  • SERDES
  • LVDS
  • Other High Speed Local Bus Protocols
  • Back Plane : VME, VPX ,CPCi, PMC ,XMC ,FMC


Memory Interface

  • SRAM, SDRAM, DDR1/2/3/4, LPDDR2/3
  • NAND, NOR Flash Technologies
  • SD/uSD/MMC/eMMC Flash Technologies
  • QSPI, SPI, EEPROM Memory Devices

Tools Supported

  • OrCAD Capture, Allegro PCB Design from Cadence
  • Altium
  • Mentor Graphics – DX Designer, Xpedition, PADS

Application

  • Aerospace and Defense
  • Automation
  • High level data security sectors
  • High performance computing
  • IoT, including wireless communications
  • Industrial and Medical
  • Telecom


ELDAAS EMBEDDED HARDWARE DESIGN

ELDAAS team has extensive expertise and years of experience in low to high complexity and high speed hardware system and board designs. This includes designs for harsh environment industrial and defense applications. Our engineers have vast experience in all aspects of good hardware design including high speed designs, timing analysis, Signal Integrity analysis to achieve “first time right” designs.These products can save you valuable time and money during your product development cycle. ELDAAS can also customize any available open source core to meet customer requirements.

Hardware Flow


ELDAAS




Success Stories

ELDAAS

Precision clocking using GPS Receiver

  • Based on ARM Cortex M4 MCU from TI
  • 8MHz Precision clock reference from GPS
  • Configurable DPLL with Multiple clock outputs
ELDAAS

Control System For Eye Surgery Microscope

  • Based on ARM Cortex M3 MCU from STM
  • Dual Efficient Motor Drivers for automation and control
  • 7” LCD for UI
ELDAAS

Q7 Carrier Board for Multi-Architecture Processors

  • Scalable multi-architecture processor platform
  • Supports Qseven Standard 2.0 Processor Modules
  • 802.3af POE powered with Auxiliary DC supply option

Software Engineering


Developing the right firmware and software is a very critical part of the design cycle for the success of a new product. Our embedded software development services include, feasibility studies, constructing build environments, embedded software design and development, performance optimization, validation, and debugging.

Our team applies its vast embedded software design knowledge to optimize your application. Whether it is for hard real-time performance or making the most of minimal resources, our team has extensive hands-on experience with common embedded platforms such as embedded Linux and various RTOS.

Our Software and firmware team can design the software architecture of a new product or inherit and adapt existing architectures to the requirements, working at multiple levels, from the interface with hardware and device drivers, to source code modifications, API creation and usage and complete application development for the product



Embedded Software Capabiities


Bare metal firmware/Embedded C for microcontrollers and Processors

Board Support Package (BSP)

Device Driver development/integration for Various devices

API Development for Standard and Non Standard protocols

Protocol Stack Porting and Integration

Application development

UI/UX Development

Cross Platform Porting

Programming Languages


C, Embedded C, Assembly

ADA 95



Development IDEs


Tools for Code Review - Understand& Beyond compare

Software Testing Tool – LDRA (Aerospace)

Code Composer Studio (CCS) for TI MCUs

Cross Core Embedded Studio (CCES) and Visual DSP++ for ADI DSPs

Keil µVision for ARM based MCUs

Kinetics Design Studio (KDS) for NXP MCUs

Atmel Studio Atmel MCUs

Standards


RTCA/DO-178B

MIL 1553

Operating System


Embedded Linux

VxWorks

TI-RTOS/FreeRTOS

Window CE

QNX

Android



Software Life Cycle


Alternate Text

Signal Processing Engineering


ELDAAS turnkey Signal processing design services includes customized solutions based on Xilinx ,Intel[Altera],Microsemi[Microchip] and Lattice FPGA's.Our team of experts are specialized in FPGA / Digital Signal Processing design projects,board design, algorithm development and high-level design methodologies and can provide design recommendations at any stage in the product development process from feasibility studies to final implementation and from verification through to debugging .

Our expertise in high perfomance ,real time DSP /FPGA projects undergoes riguours verification and quality checks saving precious time in bringing product to market.

We also focus on solutions based on embedded software design for ARM based SoC devices, Micro blaze with PLB and AXI bus interface, Nios II and soft console. Developling DSP soluitons can be challenging especially optimising and taking full advantage of targeted FPGA/SoC .Our solutions maintains high quality in DSP/FPGA designs with optimum flexibility and perfomance.


DSP Services


Architecture definition

Algorithm development

MATLAB & Simulink Modelling and Simulation

DSP design review

FPGA implementation

Verification & debugging

Cost, Performance & efficiency Optimization


PCB And Simulations Services


ELDAAS offers cutting edge PCB solutions to the global electronics players. Our specialist’s in high-speed, multi-layer, mixed signals, RF PCB designing along with combined Signal Integrity, thermal analysis, fabrication and assembly will give added value to the customers looking for one stop solutions for their PCB requirements.

We take the total accountability for the complete board development cycle from schematic development to delivering the tested assembled boards with the required approvals and certifications.We understand how to design high-density, high-speed PCBs that are manufacturable and testable,meeting time-to-market and unit cost requirements.




Tools Expertise

Cadence
  • Cadence Allegro PCB.
  • OrCad
Mentor Graphics
  • PCB Mentor Expedition.
  • Mentor Graphics PADS PCB.
  • Hyper Lynx - SI Ghz/PI/Thermal
Altium
  • Altium Designer

Mechanical Engineering

Eldaas mechanical design and manufacturing solution services focus on serving our clients in today’s ever changing and demanding markets. Due to ever increasing margin pressures and rising costs, manufacturing design and mechanical design companies are expanding to optimize their product engineering and R&D services, shorten product development timelines and more cost-effectively .

We understand the importance of innovation and quick time to market requirement. Our multidimensional team consists of experts with strong foundation in technology and manufacturing and are one-stop solutions provider with capabilities throughout the product development lifecycle, ranging from conceptual design to manufacturing.


Solutions


Alternate Text

Industrial Design


Creative multidisciplinary design ,asthetic and ergonomics, UX and industrial design


Alternate Text

Design Engineering


CAD Modelling, detail design ,manufacturing and assmebly out put generation


Alternate Text

Mechanical Analysis


Risk Assesment using simulation and evalution of sturctures and components




Alternate Text

DFX


Extensive design guidelines and checks to assess and eleminate issues in manufacturability ,assembly ,servicibility and cost


Alternate Text

Manufacturing Engineering


Process development,automation,tooling and fixtures design ,manual and training guidelines


Alternate Text

Testing & Certification


Enivironmental stress testing,shock, vibration ,functional,performance testing and certification.


Systems Integration


Systems Integration is a critical aspect that a great deal of planning and care as it decides the success of product, its operability goals, and meeting the design requirements. Our lean delivery model combined with in-depth experience and expertise across a broad spectrum in Augmenting and delivering the solution that best suits the customer requirements.


  • Feasibility Study, Sub System Architecture and Design
  • Developing custom system software & hardware sub-systems
  • System Augmentation
  • Product Sustenance


  • Identifying and sourcing Custom products and accessories
  • Application Development
  • Field Trail Support



Contact Us


  • United States
  • ELDAAS Technologies Inc
  • 8358 Six Forks Rd
  • Suite # 201
  • Raleigh
  • NC 27615
  • USA

  • + 1 984 205 4054

  • sales.usa@eldaas.com


Contact Us


  • India
  • ELDAAS Technologies Pvt. Ltd.
  • 324, 2nd Floor, 1st Cross
  • Lal Bahadur Nagar
  • B.Channasandra, Kasturinagar
  • Bangaluru - 560043
  • Karnataka, India

  • +91 80420 09090

  • sales.india@eldaas.com


© Copyright by ELDAAS Technologies Pvt Ltd. All rights reserved.                                     




A Customer Centric Innovative Product Solution and Services Company