ELD-PES02036 IF Digitizer Module

Industrial grade IF Digitizer board consist high Speed Data Acquisition Module for communication & IO Module. High Speed Data Acquisition Module: It consists of ADC interface, FPGA (Virtex-6) module with DDC and Clock module. Communication & IO Module: PCIe ,LVCMOS to interface to external systems.

The Incoming IF signals of up to 180 MHz are digitized by sampling at max 240 Msps high speed ADC. It converts the digitized IF signal to a base band complex signal centered at zero frequency and decimate to a lower sampling rate. This module IP core ported on FPGA. It has both external and internal clock mode option. It generates various clocks for ADC’s, FPGA based on internal and external clock


ADC Interface

  • Number of ADC Channels : 3
  • IF Input to ADC : 70/180MHz
  • Sampling Frequency : 250Mhz
  • Resolution : 16 bit
  • Dynamic Range : 60 dB
  • Signal to Noise Ratio(SNR) : 75 dB
  • Spurious Free Dynamic Range(SFDR) : 92 dB


  • Xilinx Virtex-6 FPGA (XC6VLX240T/130T/195T/240T/365T)
  • Narrow band digital down-converter (DDC) IP Core implemented on FPGA


  • Dedicated on-board clock management capabilities.
  • On-board clock or external clock input provision
  • Impedance: 50 Ohms.


  • 2 GB DDR3 SDRAM to FPGA.
  • 64 MB FLASH interfaced to FPGA.

Power Supply

  • 5 V/2A, 3.3 V/5A


  • XMC based PCIe Form Factor


  • Operation Temp : -40ºC to +75ºC
  • Storage Temp : -50ºC to +100ºC
  • Thermal shutdown : 80ºC
  • Qualification : MIL-STD-461E

  • RADAR Signal Processing
  • Electronic Warfare(EW)
  • Software Define Radio(SDR)

Contact Us

  • ELDAAS Technologies Pvt. Ltd.
  • 324, 2nd Floor
  • 1st Cross,Lal Bahadur Nagar
  • B.Channasandra, Kasturinagar
  • Bangalore, Karnataka, India
  • +91 80 4200 9090

© Copyright by ELDAAS Technologies Pvt Ltd. All rights reserved.                                     

online visit count

A Customer Centric Innovative Product Solution and Services Company